70,000 BTU Indirect Fired Construction Heater (Kerosene/Diesel/Oil/Jet Fuel) (HSP70ID / F105105)
PRODUCT DETAILS
The Heatstar PRO-SERIES 70,000 BTU/HR Indirect Fired Heater is an ideal heating solution when heating small job spaces. This indirect fired heater is ideal for delivering even heat to both event tents and construction sites with clean fresh heated air. You can place the heater outside the space and duct the warm air in or for a fuel savings you can place the heater in the space to be heated and vent the exhaust out. Either way it is hard to beat the comfort and safety of indirect heat.
- Heat exchanger to keep exhaust gas and heated air separate
- 11.6 gallon tank capacity
- Powerful fans ensure high static pressure
- Long life stainless steel combustion chamber
- Electronic flame control
- Water resistant flame control box
- Automatic safety and control devices
- Optional thermostat available for constant temperature control
- Durable powder coated finish
- Heavy duty duct adapter available
- UL Certified
Specifications
| Model | HSP70ID (F105105) |
| Weight | 82 lbs |
| Fuel Type | Kerosene, Diesel 1# or 2#, Fuel Oil, Jet A fuel |
| Tank Capacity (Gal) | 11.6 |
| Ignition | Continuous |
| Electrical Rating | 120v, 60 HZ, 3 Amp |
| Air Volume (CFM) | >910 |
| Heated Fuel Filter | F105109 |
| Heated Nozzle | No |
| Clearance to Combustibles: Horizontal | 6 ft |
| Adapter | F105107 Single (12") / Dual Not Applicable |
| Recirculating Ducting | Not Applicable |
| Duct Length Max | 25 ft |
| Duct Diameter | 12 in |
| Multiple Ducting Optional | Not Applicable |
| Wheel Type | Solid Rubber |
| Thermostat Optional | F105108 Analog (33') / F105106 Digital (33') |
| Item Length | 42" |
| Item Width | 20" |
| Item Height | 30.5" |
| Warranty | 1 Year Limited |