610,000 BTU Forced Air Direct Fired Industrial Heater (Kerosene/Diesel/Oil/Jet Fuel) (HS6000DF / F151100)
PRODUCT DETAILS
The HeatStar Forced Air Direct Fired Industrial Heater HS6000DF is just the right size for the job if the job is huge. Delivering a whopping 610,000 BTUs at 2800 CFM this heater can handle almost any jobsite. Included on this unit is an external hook-up for a remote thermostat, onboard diagnostics and all of the other safety bells and whistles you have come to expect from the product at Heatstar. With a gigantic 35 gallon tank you can run this unit for 8 hours on a single fill up. This HS6000DF (F151100) is always on the job. F150035 thermostat included.
- Built in oil burner
- Electronic flame control system
- Safety overheat thermostat and pressure switch
- Outlet for remote thermostat
- Stainless steel heat exchanger
- Double skinned combustion chamber for thermo-acoustic insulation and safe low surface temperature
- Preheated oil filter
- Pre-purge and post-ventilation cycles
- Twist lock fuel cap with cable
- Operates on #1, #2 Diesel, Kerosene, JP-8 or Jet fuel
- CSA certified
Specifications
| Model | HS6000DF (F151100) |
| Weight | 294 lbs |
| Fuel Type | Kerosene, Diesel 1# or 2#, Fuel Oil, Jet A Fuel |
| Tank Capacity (Gal) | 35 |
| Ignition | Continuous |
| Electrical Rating | 115 V / 6 Amps |
| Air Volume (CFM) | 2800 |
| Heated Fuel Filter | Yes |
| Heated Nozzle | No |
| Clearance to Combustibles: Horizontal | Outlet 12 ft; Top 6ft, Sides 2.5ft |
| Wheel Type | Solid Rubber |
| Thermostat Optional | Included |
| Length | 24" |
| Width | 65.75" |
| Height | 44" |
| Warranty | 1 Year Limited |